BSA441 Board Tracker - Its hot. and so is the bike.

I thought I was about to grind the last weld and skim and paint this thing, totally forgot since Im running a solid gas cap, I needed to do a proper vent. I could just drill the cap and do the dirt bike tube thing, but thatd be a no go on this bike. So I removed the cap bung that Id welded already, go me, and then re did it after.
I made the vent tube go from under the cap area, to the bottom rear of the tank opposite the petcock for the vent hose, as a newer bike would be.
Also redid the headmount a bit different since removing to motor was just to tight and I dont want to chip anything on re install in a couple days.

This has been the never ending frame/tank. But I wouldnt change a thing, itll be a really neat bike.

Been runing 95-100 outside, a hair hotter in the shop the first part of the day, hopefully itll cool off, or at least the grass will die so I wont have to mow it.

 File file file....

Heres the top of vent tube, I made a support that solid so in can get banged with a pump and not get damaged.

This is where Captain Nemo gets out of the vessel.